Cisco Cisco Tunnel Terminating Gateway (TTG)
LTE Peer Map Configuration Mode Commands
▀ precedence
▄ Command Line Interface Reference, StarOS Release 18
7150
precedence
Configures the matching criteria and precedence for mapping an LTE Policy with a peer profile.
Product
P-GW
SAEGW
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration > LTE Peer Map Configuration
configure > lte-policy > peer-map map_name
Entering the above command sequence results in the following prompt:
[local]host_name(peer-map)#
Syntax
precedence priority match-criteria { all peer-profile-name profile_name | peer-ip-address
{ ip_address | ip_address/mask } [ serving-plmnid mcc mcc mnc mnc ] peer-profile-name
profile_name | serving-plmnid mcc mcc mnc mnc [ peer-ip-address { ip_address |
ip_address/mask } ] peer-profile-name profile_name }
{ ip_address | ip_address/mask } [ serving-plmnid mcc mcc mnc mnc ] peer-profile-name
profile_name | serving-plmnid mcc mcc mnc mnc [ peer-ip-address { ip_address |
ip_address/mask } ] peer-profile-name profile_name }
no precedence priority
no
Removes the selected precedence priority number from the peer map.
priority
must be an integer from 1 to 1024.
priority
priority
must be an integer from 1 to 1024. Precedence 1 has highest priority.
match-criteria
Defines the criteria to be used to match peer nodes.
all
Specifies that all peer nodes are to be associated with the peer map.
To map a peer to a profile when there is no specific criteria required, use the
To map a peer to a profile when there is no specific criteria required, use the
all
keyword.
peer-profile-name profile_name
Sets the peer profile with which the matching criteria is associated.
profile_name
must be an existing peer profile expressed as an alphanumeric string of 1 through 64
characters.