Cisco Cisco Tunnel Terminating Gateway (TTG)
UDR Module Configuration Mode Commands
file ▀
Command Line Interface Reference, StarOS Release 18 ▄
9067
time-stamp { expanded-format | rotated-format | unix-format }
Specifies the timestamp of when the file was created be included in the file name.
expanded-format
: Specifies the UTC MMDDYYYYHHMMSS format.
rotated-format
: Specifies the YYYYMMDDHHMMSS format.
unix-format
: Specifies the UNIX format of
x
.
y
, where
x
is the number of seconds since 1/1/1970 and
y
is the fractional portion of the current second that has elapsed.
trailing-text string
Specifies the inclusion of arbitrary text string in the file name.
string
must be an alphanumeric string of 1 through 30 characters.
trap-on-file-delete
Instructs the system to send an SNMP notification (starCDRFileRemoved) when an UDR/EDR file is deleted
due to lack of space.
Default: Disabled
due to lack of space.
Default: Disabled
udr-seq-num
Specifies that the file sequence numbers that are part of the UDR file names be independently generated. If
disabled, a single set of sequence numbers are shared by both UDR and EDR files.
Default: Disabled
disabled, a single set of sequence numbers are shared by both UDR and EDR files.
Default: Disabled
xor-final-record
Specifies inserting an XOR checksum (in place of the CRC checksum) into the UDR file header if the
exclude-checksum-record
keyword is left at its default setting.
Default: Disabled
+
More than one of the previous keywords can be entered within a single command.
Usage
Use this command to configure UDR file characteristics.
Example
The following command sets the prefix of the current active UDR file to
current
:
file current-prefix current
The following command sets the base file name to
UDRfile
:
file name UDRfile