Cisco Cisco IOS Software Release 12.2(33)SRE

© 2007 Cisco Systems, Inc. All rights reserved.

The Multiprotocol BGP (MP-BGP) Support for CLNS feature provides the ability to scale 
Connectionless Network Service (CLNS) networks. The multiprotocol extensions of Border Gateway 
Protocol (BGP) add the ability to interconnect separate Open System Interconnection (OSI) routing 
domains without merging the routing domains, thus providing the capability to build very large OSI 
networks.

Configuration information is included in the “Configuring Multiprotocol BGP (MP-BGP) Support for 
CLNS” module of the Cisco IOS BGP Configuration Guide, Release 12.4T,

at the following URL:

The following sections provide information about this feature:

Information About Configuring MP-BGP Support for CLNS

How to Configure MP-BGP Support for CLNS

Configuration Examples for MP-BGP Support for CLNS

For a complete list of features included in the “Configuring Multiprotocol BGP (MP-BGP) Support for 
CLNS” module, see the Feature Information Table located toward the end of the module.

Command reference information is included in the Cisco IOS IP Routing Protocols Command Reference, 
Release 12.2SR, at the following URL:

The following commands are new or modified for this feature: