Cisco Cisco 1900 2900 3900 Series 4-Port Gigabit Ethernet HS-WIC with PoE

This example shows how to set SIM slot 1 as the primary slot:

router(config-controller)# gsm sim primary slot 1

This example shows how to configure the SIM card in slot 0 to use profile 10:

router(config-controller)# gsm sim profile 10 slot 0

The GPS feature provides the following commands:

In the syntax of these commands, the value of the unit parameter refers to:

(EHWIC) The router slot, WAN interface card (WIC) slot, and port separated by slashes (for 
example, 0/1/0).

(C880G) The number 0.

These examples show how to enable GPS standalone and NMEA for EHWIC-3G-HSPA-U:

router(config)#controller cellular 0/0

router(config-controller)#gsm gps mode standalone

...

controller Cellular 0/0

gsm gps mode standalone 

!

router(config-controller)#gsm gps nmea

...

controller Cellular 0/0

gsm gps nmea            

!

These examples show how to display summary and detailed GPS data for C881G-U-K9:

router#show cellular 0 gps 

GPS Info

-------------

GPS State: GPS enabled

GPS Mode Configured: standalone

Latitude: 37 Deg 24 Min 59 Sec North

Longitude: 121 Deg 55 Min 8 Sec West

Timestamp (GMT): Thu Jul 29 11:08:39 2010

Fix type: 3D, Height: -6 m

Heading: 408, Velocity Horiz: 3, Velocity Vert: 0

Satellite Info

----------------

Enables the GPS standalone mode.

Enables the NMEA mode.

show cellular unit gps

Displays a summary of GPS data.

show cellular unit gps detail

Displays a detailed list of GPS data.