Cisco Cisco Virtualization Experience Client 2111 Manuel De L’Administrateur

E-3

Cisco Virtualization Experience Client 2112/2212 ICA Administration Guide for WTOS 7.0_214

OL-215152-01

Appendix E Cisco VXC 2112/2212 Power Considerations

Cisco VXC 2212 Power Support

As an alternative to PoE, the Cisco PWR-CUBE-4 power adapter can support a Cisco VXC 2112
attached to a Cisco Unified IP Phone 8961, 9951, or 9971 (with or without camera) with up to three Key
Expansion Modules in a basic configuration (keyboard, mouse, and two monitors).

If you add one or more Key Expansion Modules to the Cisco Unified IP Phone 8961, 9951, or 9971, these
modules may reduce the amount of power available to the Cisco VXC client and may cause additional
restrictions for powering Cisco VXC peripheral devices.

Cisco VXC 2212 Power Support

Table E-2

describes the power configurations that are supported on the Cisco VXC 2212.

Note

•

The Unified IP Phone PC port can provide the network connectivity for the Cisco VXC 2212;
however, it does not provide power for the device. A power adapter is required when you use the
Unified IP Phone PC port for network connectivity for the Cisco VXC 2212.

•

802.af PoE can support a Cisco VXC 2212 only in a basic configuration.

9971 with
camera

802.3at

Powered
(low)

Unavailable

Powered

Basic

8961/9951/
9971 with
or without
camera

UPOE

Powered
(high)

Powered

Full

PWR-
CUBE-4

Powered
(high)

Powered

Full

Table E-1

Cisco VXC 2112 Power Support (continued)

Cisco VXC
2112 with:

Power
Source

USB

Monitor

Configuration

Port 1
keyboard

Port 2
mouse

Port 3
accessories

Port 4
accessories

DVI Port

VGA Port

Table E-2

Cisco VXC 2212 Power Support

Power
Source

USB

Monitor

Configuration

Port 1
keyboard

Port 2
mouse

Port 3
accessories

Port 4
accessories

DVI Port

VGA Port

Cisco VXC
2212

802.3af

Powered
(low)

Unavailable

Powered

Basic

802.3at

Powered
(high)

Powered

Full

UPOE

Powered
(high)

Powered

Full

PWR-
CUBE-4

Powered
(high)

Powered

Full