Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Références techniques

Use the archive download-sw privileged EXEC command to download a new image from a TFTP server 
to the switch and to overwrite or keep the existing image.

archive download-sw {/force-reload | /imageonly | /leave-old-sw | /no-set-boot | /overwrite | 

/reload | /safe} source-url

Unconditionally force a system reload after successfully downloading the 
software image.

Download only the software image but not the HTML files associated with 
the embedded device manager. The HTML files for the existing version are 
deleted only if the existing version is being overwritten or removed.

Keep the old software version after a successful download.

Do not alter the setting of the BOOT environment variable to point to the new 
software image after it is successfully downloaded.

Overwrite the software image in flash memory with the downloaded one.

Reload the system after successfully downloading the image unless the 
configuration has been changed and not been saved.

Keep the current software image; do not delete it to make room for the new 
software image before the new image is downloaded. The current image is 
deleted after the download.

The source URL alias for a local or network file system. These options are 
supported:

The syntax for the local flash file system:
flash:

The syntax for the FTP: 
ftp:[[//username[:password]@location]/directory]/image-name.tar

The syntax for an HTTP server:
http://[[username:password]@]{hostname | 
host-ip}[/directory]/image-name.tar

The syntax for a secure HTTP server:
https://[[username:password]@]{hostname | 
host-ip}[/directory]/image-name.tar

The syntax for the Remote Copy Protocol (RCP): 
rcp:[[//username@location]/directory]/image-name.tar

The syntax for the TFTP:
tftp:[[//location]/directory]/image-name.tar

The image-name.tar is the software image to download and install on the 
switch.