Cisco Cisco Access Registrar 5.0 Guide De Dépannage

How to Change the Cisco CNS Access Registrar
RexAcctScript to Produce a CSV−Format in the
Accounting File

Document ID: 6329

Contents

Introduction
Prerequisites
Requirements
Components Used
Conventions
Edit the RexAcctScript
Related Information

Introduction

This document explains how to manually edit the Cisco CNS Access Registrar RexAcctScript so that your
accounting log files reflect a CSV−format.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on Cisco CNS Access Registrar versions 1.7 and 3.0.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

Edit the RexAcctScript

If you want your accounting log files to reflect a CSV−format that can be used in your billing applications,
edit the RexAcctScript manually and recompile it. The file is located by default at
$ARINSTALLPATH/examples/rexacctscript/AcctAsScript.cpp.

To change the format of the accounting, make the changes shown in this table:

Line Number

AR 1.7

Line number

AR 3.0

From