Cisco Cisco Agent Desktop 8.0 Guide De Montage
Cisco CAD Installation Guide
52
August 8, 2012
If you have a single CallManager, leave the Subscriber section blank and click Apply.
If you have a CallManager cluster, add the locations of all of the subscriber
CallManagers in the Subscribers section. To add a subscriber location, click Add. The
Add/Edit Host dialog box appears. Enter the location of the subscriber CallManager in
one of the following ways, then click Apply.
CallManagers in the Subscribers section. To add a subscriber location, click Add. The
Add/Edit Host dialog box appears. Enter the location of the subscriber CallManager in
one of the following ways, then click Apply.
■
Select Hostname, then type the hostname of the subscriber CallManager.
■
Select Hostname, then choose the hostname of the subscriber CallManager
from the drop-down list.
from the drop-down list.
■
Select IP Address, then type the IP address of the subscriber CallManager.
NOTE: If you change these settings after initial setup, you must
restart the Sync Service and the VoIP Monitor Service to ensure that
the change is registered with them properly.
restart the Sync Service and the VoIP Monitor Service to ensure that
the change is registered with them properly.
CallManager SOAP AXL Access
Figure 9.
CallManager SOAP AXL Access window.
Enter the login ID and password required for the Publisher CallManager
Administration to access SOAP AXL (Simple Object Access Protocol Administrative XML
Layer), and select the CallManager version.
Administration to access SOAP AXL (Simple Object Access Protocol Administrative XML
Layer), and select the CallManager version.
The login ID and password are the same used to access the Publisher CallManager.