Cisco Cisco Cius 4G Guide De Conception
Cisco Cius Wireless Deployment Guide
78
On the APs tab, select the desired access points then select Add APs.
Those access points will then reboot.
Those access points will then reboot.
RF Profiles
RF Profiles can be created to specify which frequency bands, data rates, RRM settings, etc. a group of access points should use.
RF Profiles are applied to an AP group once created. See the AP Groups section for more info on AP Group configuration.
When creating an RF Profile, the RF Profile Name and Radio Policy must be defined.
Select 802.11a or 802.11b/g for the Radio Policy.
When creating an RF Profile, the RF Profile Name and Radio Policy must be defined.
Select 802.11a or 802.11b/g for the Radio Policy.
On the 802.11 tab, configure the data rates as desired.
Is recommended to enable 12 Mbps as Mandatory and 18-54 Mbps as Supported; however some environments may require 6
Mbps to be enabled as a mandatory (basic) rate.
MCS 0 should be disabled unless 6 Mbps is also enabled.
Is recommended to enable 12 Mbps as Mandatory and 18-54 Mbps as Supported; however some environments may require 6
Mbps to be enabled as a mandatory (basic) rate.
MCS 0 should be disabled unless 6 Mbps is also enabled.