Cisco Cisco IOS Software Release 15.2(3)E
Cisco Systems, Inc.
www.cisco.com
www.cisco.com
Release Notes for the Catalyst 2960-C and
2960-Plus Switches, Cisco IOS Release 15.2(4)E
and Later
2960-Plus Switches, Cisco IOS Release 15.2(4)E
and Later
First Published: October 1, 2015
Last Updated: November 9, 2016
Cisco IOS Release 15.2(4)E runs on Catalyst 2960-C and 2960-Plus switches and on Cisco EtherSwitch
service modules.
service modules.
These release notes include important information about Cisco IOS Release 15.2(4)E, any limitations,
restrictions, and caveats that apply to the releases.Verify that these release notes are correct for your
switch:
restrictions, and caveats that apply to the releases.Verify that these release notes are correct for your
switch:
•
If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.
•
If your switch is on, use the show version privileged EXEC command. See the
•
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the
See the
You can download the switch software from this site (registered Cisco.com users with a login password):
Contents
•
•
•
•
•
•
•