Cisco Cisco IOS Software Release 15.2(3)E
Americas Headquarters:
© 2014 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for the Catalyst 2960, 2960-S,
2960-SF, 2960-C, 2960-Plus, and 3560-C Switches,
Cisco IOS Release 15.2(2)E and Later
2960-SF, 2960-C, 2960-Plus, and 3560-C Switches,
Cisco IOS Release 15.2(2)E and Later
First Published: June 27, 2016
Last Updated: December 23, 2016
Last Updated: December 23, 2016
Cisco IOS Release 15.2(2)E and later runs on Catalyst 2960-S, 2960-SF, 2960-C, 2960-Plus and 3560-C
switches and on Cisco EtherSwitch service modules.
switches and on Cisco EtherSwitch service modules.
The Catalyst 2960-S supports switch stacking. Unless otherwise noted, the term switch refers to a
standalone switch and not to a switch stack.
standalone switch and not to a switch stack.
The Catalyst 3560-C switch does not support the IP services image.
These release notes include important information about Cisco IOS Release 15.2(2)E and any
limitations, restrictions, and caveats that apply to the releases.Verify that these release notes are correct
for your switch:
limitations, restrictions, and caveats that apply to the releases.Verify that these release notes are correct
for your switch:
•
If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.
•
If your switch is on, use the show version privileged EXEC command. See the
•
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the
See the
You can download the switch software from this site (registered Cisco.com users with a login password):
Contents
•
•
•
•