Cisco Cisco IOS Software Release 12.0(14)S

This feature module describes the two new variants of the Cisco 7200 I/O card. The 
Cisco 7200-I/O-GE+E provides one Gigabit Ethernet port and one Ethernet port. The 
Cisco 7200-I/O-2FE/E provides two autosensing Fast Ethernet 10/100 Mb ports.

This document includes the following sections:

The Cisco 7200-I/O-GE+E is an Input/Output controller that provides one Gigabit Ethernet and one 
Ethernet port. It is equipped with a GBIC receptacle for 1000 megabits per second (Mbps) operation 
and an RJ-45 receptacle for 10 Mbps operation.

The Cisco 7200-I/O-2FE/E is an Input/Output controller that provides two autosensing Fast Ethernet 
ports and is equipped with two RJ-45 receptacles for 10/100 Mbps operation.

I/O controllers support the following features:

Dual EIA/TIA-232 channels for local console and auxiliary ports

NVRAM for storing the system configuration and environmental monitoring logs

Two PC Card slots that hold Flash disks or Flash memory cards for storing the default Cisco IOS 
software image

Flash memory for storing the boot helper image

Two environmental sensors for monitoring the cooling air as it enters and leaves the chassis