Cisco Cisco Content Security Management Appliance M1070 Mode D'Emploi

Several of the features or commands described in this chapter can affect routing precedence. For more 
information, see 

.

Keys are specific to the serial number of your appliance and specific to the feature that you enable. You 
cannot reuse a key from one system on another system.

To perform the tasks described in this section from the command-line prompt, use the 

featurekey

 

command. 

For information about appliance behavior upon license and feature key expiration, see the Cisco Content 
Security Virtual Appliance Installation Guide available from 

To view license information, use the 

showlicense

 command in the command-line interface (CLI.) 

The operations and commands described in this section enable you to perform maintenance-related tasks 
on the Security Management appliance. This section describes the following operations and commands:

shutdown

reboot

View all active feature keys for the appliance 

View any feature keys that are pending 
activation 

Search for new keys that have been issued 

Install feature keys manually 

Activate feature keys 

Select Management Appliance > System 
Administration > Feature Keys.

To add a new feature key manually, paste or enter 
the key into the Feature Key field and click 
Submit Key. An error message appears if the 
feature is not added (for example, if the key is 
incorrect); otherwise, the feature key is added to 
the list. 

If the appliance is configured to automatically 
download and install new keys as they are issued. 
the Pending Activation list is always empty. 

Enable or disable automatic download and 
activation of feature keys 

Select Management Appliance > System 
Administration > Feature Key Settings

By default, the appliance periodically checks for 
new keys.

Renew expired feature keys

Contact your Cisco representative