Cisco Cisco Content Security Management Appliance M1070 Mode D'Emploi

When accessing the GUI, do not use multiple browser windows or tabs simultaneously to make changes 
to the Security Management appliance. Do not use concurrent GUI and CLI sessions either. Doing so 
will cause unexpected behavior and is not supported.

By default, your session times out if you are idle for more than 30 minutes or if you close the browser 
without logging out. If this happens, you must reenter your user name and password. To change the 
timeout limit, see 

. 

Open your web browser and type 192.168.42.42 in the IP address text field. 

Enter the following default values: 

User name: admin

Password: ironport

The command line interface, or CLI, is accessed on the Security Management appliance in the same way 
that the CLI is accessed on all Cisco Content Security appliances. There are, however, some differences:

System setup must be performed through the GUI.

Some CLI commands are not available on the Security Management appliance. For a list of which 
commands are not supported, see the CLI Reference Guide for Cisco Content Security Appliances. 

For production deployments, you should use SSH to access the CLI. Use a standard SSH client to access 
the appliance on port 22. For lab deployments, you can also use telnet; however, this protocol is not 
encrypted. 

With the appropriate license key, AsyncOS can display the GUI and CLI in any of the following 
languages:

English

French

Spanish

German

Italian

Korean