Cisco Cisco Content Security Management Appliance M1070 Mode D'Emploi
A-5
Cisco IronPort AsyncOS 7.2.0 for Security Management User Guide
OL-21768-01
Appendix A Accessing the Appliance
6.
Select the check box next to each service you want to enable on this IP
interface. Change the corresponding port if necessary.
interface. Change the corresponding port if necessary.
7.
Select whether to enable redirecting HTTP to HTTPS for appliance
management on the interface.
management on the interface.
8.
If you are using the Cisco IronPort Spam Quarantine, you can select HTTP or
HTTPS or both and specify the port numbers for each. You can also select
whether to redirect HTTP requests to HTTPS. Finally, you can specify
whether the IP interface is the default interface for the Cisco IronPort Spam
Quarantine, and whether to use the hostname as the URL or provide a custom
URL.
HTTPS or both and specify the port numbers for each. You can also select
whether to redirect HTTP requests to HTTPS. Finally, you can specify
whether the IP interface is the default interface for the Cisco IronPort Spam
Quarantine, and whether to use the hostname as the URL or provide a custom
URL.
9.
Submit and commit your changes.
FTP Access
To access the appliance via FTP, follow these steps:
Warning
By disabling services via the Management Appliance > Network > IP Interfaces
page or the
page or the
interfaceconfig
command, you can disconnect yourself from the
GUI or CLI, depending on how you are connected to the appliance. Do not
disable services with this command if you are not able to reconnect to the
appliance using another protocol, the Serial interface, or the default settings on
the Management port.
disable services with this command if you are not able to reconnect to the
appliance using another protocol, the Serial interface, or the default settings on
the Management port.
1.
Use the Management Appliance > Network > IP Interfaces page (or the
interfaceconfig
command) to enable FTP access for the interface.
In this example, the Management interface is edited to enable FTP access on
port 21 (the default port):
port 21 (the default port):