Cisco Cisco IOS Software Release 12.0(13)S7

Page de 18
 
Lawful Intercept on Cisco 12000 Series Router ISE Line Cards
Supported Standards and MIBs
7
Part Number OL-8679-01 (Rev. A0) April 1, 2008
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image 
support. Access Cisco Feature Navigator at 
. You must have an account on 
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at 
the login dialog box and follow the instructions. 
Supported Standards and MIBs
Lawful Intercept on the Cisco 12000 series router conforms to the following standards and MIBs.
Standards
Service Independent Intercept (SII) architecture 
Simple Network Management Protocol Version 3 (SNMP V3)
MIBs
CISCO-TAP-MIB, Version 1
VoIP Lawful Intercept Provisioning TAP-MIB
Voice over IP (VoIP) Lawful Intercept provisioning is based on the local media gateway IP address and 
the UDP port. The mediation device uses the CISCO-TAP-MIB to provision Voice over IP (VoIP) 
intercepts. In Voice over IP (VoIP) Lawful Intercept provisioning, an intercept can be enabled or disabled 
during a voice call.
Dial-up Lawful Intercept Provisioning TAP-MIB
Dial-up Lawful Intercept provisioning does not have fixed IP addresses. The IP addresses are assigned 
dynamically. The mediation device uses the CISCO-TAP-MIB to provision dial-up intercepts.
Prerequisites
Before you can provision Lawful Intercept on a Cisco 12000 series router, you must have the following 
components already set up:
SNMP server with VACM views
Mediation device
Configuration Tasks
See the following sections for configuration tasks for the Lawful Intercept feature: