Cisco Cisco IOS Software Release 12.0(23)S
ATM VC Bundle Management on Cisco 12000 Series 8-Port OC-3 STM-1 ATM Line Cards
Monitoring and Maintaining VC Bundles and Their VC Members
9
Cisco IOS Release 12.0(23)S
Configuring a VC Not to Accept Bumped Traffic
To configure an individual VC bundle member not to accept traffic that otherwise might be directed to
it if the original VC carrying the traffic goes down, use the following command in bundle-vc
configuration mode:
it if the original VC carrying the traffic goes down, use the following command in bundle-vc
configuration mode:
Monitoring and Maintaining VC Bundles and Their VC Members
To gather information on VC bundles so as to monitor them or to troubleshoot problems that pertain to
their configuration or use, use the following commands in privileged EXEC mode, as needed:
their configuration or use, use the following commands in privileged EXEC mode, as needed:
Command
Purpose
Router(config-if-atm-member)# no bump traffic
Configures the VC not to accept any bumped traffic that
would otherwise be redirected to it.
would otherwise be redirected to it.
Command
Purpose
Router# show atm bundle bundle-name
Displays the bundle attributes assigned to each VC bundle
member and the current working status of the VC bundle
members.
member and the current working status of the VC bundle
members.
Router# show atm bundle bundle-name statistics
[detail]
Displays statistics or detailed statistics on the specified VC
bundle.
bundle.
Router# show atm map
Displays a list of all configured ATM static maps to remote hosts
on an ATM network and on ATM bundle maps.
on an ATM network and on ATM bundle maps.
Router# debug atm bundle adjacency events
Displays information about ATM bundle adjacency change
events.
events.
Router# debug atm bundle errors
Displays information on bundle errors.
Router# debug atm bundle events
Displays a record of bundle events.