Cisco Cisco IOS Software Release 12.0(22)S

Page de 154
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
 
© 2002, 2006 Cisco Systems, Inc. All rights reserved.
MPLS Traffic Engineering—DiffServ Aware
First Published: 12.0(11) ST
Last Updated: February 28, 2006
This guide presents extensions made to Multiprotocol Label Switching Traffic Engineering (MPLS TE) 
that make it DiffServ aware. Specifically, the bandwidth reservable on each link for constraint-based 
routing (CBR) purposes can now be managed through two bandwidth pools: a global pool and a 
sub-pool. The sub-pool can be limited to a smaller portion of the link bandwidth. Tunnels using the 
sub-pool bandwidth can then be used in conjunction with MPLS Quality of Service (QoS) mechanisms 
to deliver guaranteed bandwidth services end-to-end across the network. 
History for the MPLS Traffic Engineering—DiffServ Aware Feature
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image 
support. Access Cisco Feature Navigator at 
. You must have an account on 
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at 
the login dialog box and follow the instructions that appear.
Release
Modification
12.0(11) ST
This feature was introduced.
12.0(14) ST
Support added for Cisco Series 7500(VIP) platform.
Support added for IS-IS Interior Gateway Protocol.
12.0(14) ST-1
Support added for guaranteed bandwidth service directed to many destination 
prefixes (for example, guaranteed bandwidth service destined to an autonomous 
system or to a BGP community).
12.0(22)S
This feature integrated into Cisco IOS Release 12.0(22)S.
12.2(28)SB
This feature was integrated into Cisco IOS Release 12.2(28)SB.