Cisco Cisco IOS Software Release 12.0(22)S
MPLS Egress NetFlow Accounting
show mpls interfaces
24
Cisco IOS Releases 12.0(10)ST, 12.1(5)T, and 12.0(22)S
Examples
The following sample output shows whether or not MPLS egress NetFlow accounting is enabled on the
interface:
interface:
Router# show mpls interfaces internal
Interface Ethernet0/0/1:
IP tagging enabled (tdp)
TSP Tunnel tagging not enabled
Tag Frame Relay Transport tagging not enabled
Tagging operational
IP to Tag Fast Feature Switching Vector
Tag Switching Turbo Feature Vector
MTU = 1500, status=0x100043, appcount=1
Output_feature_state=0x0
Note
As shown above, output_feature_state=0x0; therefore, MPLS egress NetFlow
accounting is disabled.
accounting is disabled.
Tag VPI = 1, Control VC = 0/32
Interface Ethernet0/0/2:
IP tagging enabled (tdp)
TSP Tunnel tagging not enabled
Tag Frame Relay Transport tagging not enabled
Tagging operational
IP to Tag Fast Feature Switching Vector
Tag Switching Turbo Feature Vector
MTU = 1500, status=0x100043, appcount=1
Output_feature_state=0x1
Note
As shown above, output_feature_state=0x1; therefore, MPLS egress NetFlow
accounting is enabled.
accounting is enabled.
Tag VPI = 1, Control VC = 0/32
Interface ATM1/0/0.1:
IP tagging enabled (tdp)
Related Commands
ethernet
Specifies the Ethernet interface
null
Specifies the null interface
Table 8
Interface Types
Type
Description
Command
Description
Enables debugging of MPLS egress NetFlow accounting.
Displays a message that the quick flag is set for all prefixes learned from
the enabled MPLS egress NetFlow accounting interface.
the enabled MPLS egress NetFlow accounting interface.