Cisco Cisco IOS Software Release 12.3(4)T
PPPoE Session Limit per NAS Port
subscriber access
14
Cisco IOS Release: Multiple releases (see the Feature History table)
initiate-to ip 10.1.1.1
local name s7200-2
l2tp attribute clid mask-method right * 255 match #184
!
vpdn-group 3
accept dialin
procotol pppoe
virtual-template 1
!
subscriber access pppoe pre-authorize nas-port-id mlist-llid send username
!
Related Commands
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks
can be found at
can be found at
. Third party trademarks mentioned are the property of their respective owners. The use of the word
partner does not imply a partnership relationship between Cisco and any other company. (1005R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and
figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and
coincidental.
figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and
coincidental.
© 2002–2003, 2005–2006 Cisco Systems, Inc. All rights reserved.
Command
Description
ip radius source-interface
Forces RADIUS to use the IP address of a specified interface for
all outgoing RADIUS packets.
all outgoing RADIUS packets.
l2tp attribute clid mask-method Configure a NAS to provide L2TP calling line ID suppression for
calls belonging to a VPDN group.
subscriber authorization enable Enables SSS type authorization.
vpdn authorize domain
Enables domain preauthorization on a NAS.
vpdn l2tp attribute clid
mask-method
mask-method
Configure a NAS to provide L2TP calling line ID suppression
globally on the router.
globally on the router.