Cisco Cisco IOS Software Release 12.4(4)T
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
1346
Caveats for Cisco IOS Release 12.4T
OL-8003-09 Rev. Z0
Resolved Caveats—Cisco IOS Release 12.4(4)T
•
CSCei71950
Symptoms: During Group Domain of Interpretation (GDOI) rekeys, the following error message and
traceback may be generated:
traceback may be generated:
%SYS-3-MGDTIMER: Uninitialized timer, set_exptime, timer = 66D55618.
-Process= "Crypto IKMP", ipl= 0, pid= 175
-Traceback= 0x607656DC 0x60877F20 0x60878824 0x60878A10 0x629D2BC4 0x629D311C
0x629D32A8 0x629DB6CC 0x629DDB78
Conditions: This symptom is observed on a Cisco router that is configured for IPSec and multicast.
Workaround: Do not enable GDOI rekeys.
•
CSCei73829
Symptoms: Cisco VPN Client 4.6.x connected to a Cisco IOS router configured as the VPN Server
passes traffic correctly but after phase 2 SA rekeys, repeated phase 2 SA rekeying occurs and the
Cisco VPN Client disconnects. The client log shows:
passes traffic correctly but after phase 2 SA rekeys, repeated phase 2 SA rekeying occurs and the
Cisco VPN Client disconnects. The client log shows:
2007 20:18:34.732 08/06/05 Sev=Warning/2
IKE/0xE3000099
Immature Navigation Termination due to error (Navigator:195)
The router debug shows:
IPSEC(update_key_lifetimes): volume lifetime reached 0, dropping SA sibling
Conditions: This symptom has been observed with Cisco VPN Client 4.6.x connected to a router
configured as the VPN Server and running Cisco IOS Release 12.4(2)T.
configured as the VPN Server and running Cisco IOS Release 12.4(2)T.
Workaround: Downgrade the router to Cisco IOS Release 12.4(3).
•
CSCei76753
Symptoms: BRI backhauling does not work on Cisco 2801 routers.
Conditions: This symptom has been seen on Cisco 2801 routers with Cisco IOS interim
Release 12.4(02.02)T and Cisco IOS Release 12.4(2)T1. Backhauling works perfectly with
Cisco IOS interim Release 12.4(1.9).
Release 12.4(02.02)T and Cisco IOS Release 12.4(2)T1. Backhauling works perfectly with
Cisco IOS interim Release 12.4(1.9).
Workaround: There is no workaround.
•
CSCei78836
Symptoms: When PPPoE L2TP sessions are brought up, a “Cannot insert into AVL tree” error
message is generated for each session that is brought up.
message is generated for each session that is brought up.
Conditions: This symptom is observed only when a policy map is applied to the virtual template
interface that is used for the sessions.
interface that is used for the sessions.
Workaround: There is no workaround.
•
CSCei81698
Symptoms: When Cisco CallManager Express (CME) 3.4 interworks with Cisco Unity 4.1, Unity
may send a Message Waiting Indication (MWI) notification to CME for extensions that are not
configured on CME.
may send a Message Waiting Indication (MWI) notification to CME for extensions that are not
configured on CME.
Conditions: This symptom is observed when you configure Cisco Unity 4.1 with some mailboxes
and then reset Unity. (Doing so may cause CME to crash.)
and then reset Unity. (Doing so may cause CME to crash.)
Workaround: There is no workaround.
•
CSCei83122
Symptoms: Although a Flexible Packet Matching (FPM) service policy can be applied to the host
and transit control-plane configuration submodes, the FPM service policy does not apply the
expected policy action (for example, a drop action) to matching packets because FPM functionality
is not supported in the host and transit control-plane configuration submodes.
and transit control-plane configuration submodes, the FPM service policy does not apply the
expected policy action (for example, a drop action) to matching packets because FPM functionality
is not supported in the host and transit control-plane configuration submodes.