Cisco Cisco IOS Software Release 12.3(11)T
Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
IP Communications Voice/Fax Network Module
The IP Communications Voice/Fax Network Module feature provides the ability to directly connect the
PSTN and legacy telephony equipment to Cisco 2600XM series, Cisco 2691, Cisco 3600 series, and
Cisco 3700 series multiservice routers, enabling applications such as IP telephony, toll bypass, and full
gateway integration. The voice WAN interface cards (VWICs) supported by the new network modules
include 2- and 4-port FXS; 2- and 4-port FXO; 2-port DID, E&M, and BRI (S/T); and 1- and 2-port
T1/E1.
PSTN and legacy telephony equipment to Cisco 2600XM series, Cisco 2691, Cisco 3600 series, and
Cisco 3700 series multiservice routers, enabling applications such as IP telephony, toll bypass, and full
gateway integration. The voice WAN interface cards (VWICs) supported by the new network modules
include 2- and 4-port FXS; 2- and 4-port FXO; 2-port DID, E&M, and BRI (S/T); and 1- and 2-port
T1/E1.
Feature History for the IP Communications Voice/Fax Network Module
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at
support. Access Cisco Feature Navigator at
. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
the login dialog box and follow the instructions that appear.
Contents
•
•
•
•
•
•
Release
Modification
12.2(15)ZJ
This feature was introduced.
12.3(4)T
This feature was integrated into Cisco IOS Release 12.3(4)T.
12.3(11)T2
The groundstart auto-tip command was added to the command-line
interface and the feature was integrated into Cisco IOS
Release 12.3(11)T2. This new command is not supported on the
Cisco 1700 series platform.
interface and the feature was integrated into Cisco IOS
Release 12.3(11)T2. This new command is not supported on the
Cisco 1700 series platform.