Cisco Cisco IOS Software Release 12.4(4)T
Routed Bridge Encapsulation with ATM Virtual Circuit Bundles
How to Configure Routed Bridge Encapsulation with ATM Virtual Circuit Bundles
8
Cisco IOS Release: multiple releases
Verifying Routed Bridge Encapsulation with ATM Virtual Circuit Bundles
To display information about routed bridge encapsulation with ATM virtual circuit bundles, use the
following show commands in privileged EXEC mode. You can use these commands in any combination
or order.
following show commands in privileged EXEC mode. You can use these commands in any combination
or order.
SUMMARY STEPS
1.
enable
2.
show atm vc
3.
show interfaces
4.
show interfaces virtual-access
DETAILED STEPS
Step 8
inarp-vc
Example:
Router(config-if-atm-member)# inarp-vc
Enables InARP for the PVC bundle member.
Step 9
end
Example:
Router(config-if-atm-member)# end
Ends the configuration session and returns to privileged
EXEC mode.
EXEC mode.
Command or Action
Purpose
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enters privileged EXEC mode.
•
Enter your password if prompted.
Step 2
show atm vc
Example:
Router# show atm vc
Displays all ATM PVCs and switched virtual circuits (SVCs) and their
traffic information.
traffic information.
Step 3
show interfaces
Example:
Router# show interfaces
Displays interleaving statistics.
•
Interleaving data is displayed only if interleaving occurs.
Step 4
show interfaces virtual-access
Example:
Router# show interfaces virtual-access
Displays multilink bundle information.