Cisco Cisco IOS Software Release 12.4(11)T
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
Tunnel Route Selection
First Published: November 17, 2006
Last Updated: November 17, 2006
Last Updated: November 17, 2006
The Tunnel Route Selection feature allows the tunnel transport to be routed using a subset of the routing
table. When there are equal-cost routes to a tunnel destination, normal tunnel transport behavior is to use
one of the available routes chosen at random. The Tunnel Route Selection feature allows the explicit
configuration of the outgoing interface for the tunnel transport.
table. When there are equal-cost routes to a tunnel destination, normal tunnel transport behavior is to use
one of the available routes chosen at random. The Tunnel Route Selection feature allows the explicit
configuration of the outgoing interface for the tunnel transport.
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module. To reach
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
.
Finding Support Information for Platforms and Cisco IOS and Catalyst OS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS
software image support. To access Cisco Feature Navigator, go to
software image support. To access Cisco Feature Navigator, go to
. An
account on Cisco.com is not required.
Contents
•
•
•
•
•
•
•