Cisco Cisco IOS Software Release 12.4(9)T

Enhanced MF for FGD and Analog CAMA Trunks

Configuration Examples for Enhanced MF for FGD and Analog CAMA Trunks

Enhanced MF for FGD and Analog CAMA Trunks

DETAILED STEPS

Examples

The following example enables e911 services on a VoIP dial peer:

Router(config-dial-peer)# voice-class sip e911

The following example enables e911 services in global configuration mode under the voice service VoIP
SIP configuration mode:

Router(config-term)# voice service voip

Router(conf-voi-serv)# sip

Router(conf-serv-sip)# e911

Verifying and Troubleshooting e911 Support on SIP and VoIP Dial Peers

To verify your configuration, use the show running-config command in global configuration mode.

To troubleshoot your configuration, use the debug ccsip messages command in global configuration
mode.

Configuration Examples for Enhanced MF for FGD and Analog
CAMA Trunks

This sections contains configuration examples for the Enhanced MF for FGD and Analog CAMA Trunks
feature.

•

Command or Action

Purpose

Step 1

enable

Example:

Router> enable

Enables privileged EXEC mode.

•

Enter your password if prompted.

Step 2

configure

terminal

Example:

Router# configure terminal

Enters global configuration mode.

Step 3

voice service voip sip e911

(SIP global)

voice-class sip e911

(dialpeer)

Example:

Router(config-term)# voice service voip

Example:

Router(config-dial-peer)# voice-class sip

Enables e911 support for a particular dial peer in VoIP
dialpeer configuration mode or enables e911 support for
SIP in SIP global configuration mode.

Default for the dial peer is sipE911System.