Cisco Cisco IOS Software Release 12.4(11)T

© 2006 Cisco Systems, Inc. All rights reserved.

Cisco IOS Release 12.4(11)T introduced support for USB Storage on NPE-G2. 

This feature enhances the USB token PIN security for automatic login and increases the flexibility of 
USB token configuration and the RSA key storage. 

Configuration information is included in the “Storing PKI Credentials” module of the 

at the following URL:

The following sections provide information about this feature:

Configuring the USB Token

Setting Administrative Functions on the USB Token

For a complete list of features included in the “Storing PKI Credentials” module, see the Feature 
Information Table located toward the end of the module.

An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands 
List, Release 12.4T, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tsec_r/index.htm

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and 
figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and