Cisco Cisco IOS Software Release 12.2(11)T

Session Initiation Protocol for Voice over IP Feature for Cisco uBR925 Cable Access Router and Cisco CVA122 Cable

Configuration Examples

Cisco IOS Release 12.2(11)T

no ip route-cache

arp timeout 0

bridge-group 59

bridge-group 59 spanning-disabled

ip classless

ip pim bidir-enable

ip http server

no ip http cable-monitor

snmp-server manager

call rsvp-sync

voice-port 0

input gain -2

ren 0

voice-port 1

input gain -2

ren 0

mgcp profile default

dial-peer voice 100 pots

destination-pattern 8886618

port 0

dial-peer voice 101 voip

destination-pattern 888662.

session protocol sipv2

session target ipv4:188.199.0.35

dial-peer voice 102 pots

destination-pattern 8886619

port 1

sip-ua

line con 0

line vty 0 4

scheduler max-task-time 5000

end

Verifying SIP Configuration Example

Enter the show running-config command to verify your configuration, or use the show sip-ua
subcommands to verify the SIP configurations.

The following example shows sample output for the show sip-ua statistics command:

Router# show sip-ua statistics

SIP Response Statistics (Inbound/Outbound)

Informational:

Trying 0/0, Ringing 0/0,

Forwarded 0/0, Queued 0/0,

SessionProgress 0/0

Success:

OkInvite 0/0, OkBye 0/0,