Cisco Cisco IOS Software Release 12.2(11)T
Network Access Server Package for Media Gateway Control Protocol
Prerequisites
6
Cisco IOS Release 12.2(2)XB and Release 12.2(11)T
Prerequisites
•
For the Cisco AS5350 and Cisco AS5400, install Cisco IOS Release 12.2(2)XB or a later release.
For the Cisco AS5850, install Cisco IOS Release 12.2(11)T or a later release.
For the Cisco AS5850, install Cisco IOS Release 12.2(11)T or a later release.
•
Configure a data network. Refer to
, Release 12.2.
•
Configure a Voice over IP (VoIP) network if desired. Refer to
•
Configure MGCP.
–
For MGCP 1.0, refer to the following document:
, Cisco IOS Release 12.2(2)XB
–
For MGCP 0.1, refer to the following publication:
Configuration Tasks
With the Network Access Server Package for Media Gateway Control Protocol feature, the NAS
supports both data and voice calls, which can be managed from a single call agent that supports MGCP
with the NAS package. The NAS package provides the interface to a call agent (media gateway
controller) for handling modem calls that terminate on the NAS and that originate from the PSTN,
including callback requests. Results of AAA authorization and preauthorization requests from the NAS
are reported to the call agent as notifications.
supports both data and voice calls, which can be managed from a single call agent that supports MGCP
with the NAS package. The NAS package provides the interface to a call agent (media gateway
controller) for handling modem calls that terminate on the NAS and that originate from the PSTN,
including callback requests. Results of AAA authorization and preauthorization requests from the NAS
are reported to the call agent as notifications.
See the following sections for configuration tasks for the Network Access Server Package for Media
Gateway Control Protocol feature. Each task in the list is identified as either required or optional.
Gateway Control Protocol feature. Each task in the list is identified as either required or optional.
•
•
(required)
•
(required)
•
(optional)