Cisco Cisco IOS Software Release 12.2(2)XT
18
Release Notes for Cisco 3600 Series for Cisco IOS Release 12.2 XT
OL-1979-01 Rev. D1
Limitations and Restrictions
Limitations and Restrictions
Caveat CSCdr91706 and IOS HTTP Vulnerability
A defect in multiple releases of Cisco IOS software will cause a Cisco router or switch to halt and reload
if the IOS HTTP service is enabled, browsing to http://router-ip/anytext?/ is attempted, and the enable
password is supplied when requested. This defect can be exploited to produce a denial of service (DoS)
attack.
if the IOS HTTP service is enabled, browsing to http://router-ip/anytext?/ is attempted, and the enable
password is supplied when requested. This defect can be exploited to produce a denial of service (DoS)
attack.
The vulnerability, identified as Cisco bug ID CSCdr91706, affects virtually all mainstream Cisco routers
and switches running Cisco IOS software releases 12.0 through 12.1, inclusive. This is not the same
defect as CSCdr36952.
and switches running Cisco IOS software releases 12.0 through 12.1, inclusive. This is not the same
defect as CSCdr36952.
The vulnerability has been corrected and Cisco is making fixed releases available for free to replace all
affected IOS releases. Customers are urged to upgrade to releases that are not vulnerable to this defect.
affected IOS releases. Customers are urged to upgrade to releases that are not vulnerable to this defect.
This vulnerability can only be exploited if the enable password is known or not set.
You are strongly encouraged to read the complete advisory, which is available at
http://www.cisco.com/warp/public/707/ioshttpserverquery-pub.shtml.
Important Notes
The following sections contain important notes about Cisco IOS Release 12.2(2) XT that can apply to
the Cisco 3600 series.
the Cisco 3600 series.
Addition of squeeze Command for Cisco 2600 and Cisco 3600 Series Routers
The squeeze command, which is used to erase all files marked for deletion on a Flash file system, is now
available on Cisco 2600 and Cisco 3600 series routers.
available on Cisco 2600 and Cisco 3600 series routers.
Changes to output attenuation Command
In Cisco IOS Release 12.2(2), the range of the output attenuation command for voice ports has changed.
The old range was 0 to 14. The new range is -6 to 14.
The old range was 0 to 14. The new range is -6 to 14.
Changes to Feature Support with Cisco IOS Release 12.2(2) XT
Cisco IOS Release 12.2(2)XT does not support the following features:
•
Remote Source-Route Bridging (RSRB)
•
AppleTalk
•
Apollo Domain
•
Banyan Virtual Integrated Network Service (VINES)
•
DECnet
•
Xerox Network Systems (XNS)