Cisco Cisco IOS Software Release 12.2(8)T

This document was originally produced for Cisco IOS Release 12.2(11)T. This feature has been updated 
in subsequent releases, and more recent documentation is available. 

If you are using Cisco IOS Release 12.2(11)T or higher, refer to the following section in the 
Configuring Additional SIP Features chapter of the 

, 

Cisco IOS Voice Configuration Library, Release 12.3: 

This document describes the SIP Gateway Support for the Bind Command feature. Currently, Session 
Initiation Protocol (SIP) signaling and media paths use an IP address that is provided by the IP layer as 
the source address. However, with the addition of the bind command, you can now configure the source 
IP address of signaling packets, or both signaling and media packets.

This document includes the following sections:

 

12.2(2)XB

This feature was introduced on the Cisco 2600 series, Cisco 3600 series, 
Cisco 7200 series, Cisco AS5300, Cisco AS5350, and Cisco AS5400 
platforms.

12.2(2)XB2

This feature was implemented on the Cisco AS5850 platform.

12.2(8)T

This feature was integrated into Cisco IOS Release 12.2(8)T and support 
was added for the Cisco 3700 series. The Cisco AS5300, Cisco AS5350, 
Cisco AS5400, and Cisco AS5850 platforms were not supported in this 
release.

12.2(11)T

Support was added for the Cisco AS5300, Cisco AS5350, Cisco AS5400, 
and Cisco AS5850 platforms.