Cisco Cisco IOS Software Release 12.2(2)XA

This document includes the following sections:

 

The Cisco IOS software features supported on the Cisco AS5400 and Cisco AS5350 universal gateways 
in Cisco IOS Release 12.2(2)XA are listed in the section following. These features have been previously 
released on other Cisco access servers and high-availability platforms. Therefore the individual platform 
name may not be referenced for the universal gateways. Other differences may exist for the various 
platforms that are documented. For example, the universal gateways use SPE software and do not use 
VCWare. Please note the following discrepancies when referencing the feature documentation:

The AS5400 does not support the MICA Technologies modem card, Metrocom modem card, or VoIP 
feature card. Voice and modem functions are provided by the universal port dial feature card running 
SPE firmware. See the Cisco AS5400 Card Installation Guide for more information.

All references to the Cisco AS5300 in these documents apply to the Cisco AS5400 and 
Cisco AS5350 platforms with the following exceptions:

Use the dial feature card (DFC) instead of voice feature cards (VFCs).

Use SPE firmware instead of portware or VCWare.

Run Cisco IOS release software, for VoIP functionality, that is compatible with the 
recommended Cisco IOS version software in your platform software configuration guide.

12.2(2)XA

These features were implemented for the Cisco AS5400 and 
Cisco AS5350 universal gateways.