Cisco Cisco IOS Software Release 12.2(15)T Guide Du Développeur
C H A P T E R
6-1
Cisco Gatekeeper External Interface Reference, Version 4.2
Cisco IOS Release 12.2(15)T
6
GKTMP Command Reference
This chapter describes commands that support the new Cisco IOS Gatekeeper functions and includes the
following commands:
following commands:
•
•
•
•
•
•
•
Note
As with all Cisco IOS commands, you can abbreviate the Cisco IOS Gatekeeper trigger registration
commands. To abbreviate a command, simply enter the first few characters of the command and press
tab. To obtain online help for a command, enter the first few characters of the command followed by a
question mark.
commands. To abbreviate a command, simply enter the first few characters of the command and press
tab. To obtain online help for a command, enter the first few characters of the command followed by a
question mark.
For additional Cisco IOS commands, see the following documents:
Cisco High Performance Gatekeeper
Cisco IOS Voice, Video, and Fax Command Reference, Release 12.2
server trigger
To configure a static server trigger for external applications, enter the server trigger command from
Gatekeeper mode. Enter the no form of this command to remove a single statically configured trigger
entry. Enter the “all” form of the command to remove every static trigger you configured if you want to
delete them all.
Gatekeeper mode. Enter the no form of this command to remove a single statically configured trigger
entry. Enter the “all” form of the command to remove every static trigger you configured if you want to
delete them all.
server trigger {arq | lcf | lrj | lrq | rrq | urq | drq | rai | brq} gkid priority server-id
server-ip_address server-port
no server trigger { arq | lcf | lrj | lrq | rrq | urq | drq | rai | brq} gkid priority
no server trigger all