Cisco Cisco IOS Software Release 12.2(2)XA
Configuring AAL2 and AAL5 for the High Performance ATM Advanced Integration Module on the Cisco 2600 Series
Command Reference
33
12.2(2)XA
interface ATM0
ip address 192.168.226.3 255.255.255.0
ip mroute-cache
no atm ilmi-keepalive
pvc 99/99
vbr-rt 1536 1536 254
encapsulation aal2
!
!
voice-port 1:1
timeouts wait-release 3
connection trunk 2001
!
dial-peer voice 201 pots
destination-pattern 1001
port 1:1
!
dial-peer voice 1001 voatm
destination-pattern 2001
called-number 1001
session protocol aal2-trunk
session target ATM0 pvc 99/99 21
dtmf-relay
signal-type trans
codec aal2-profile custom 100 g711ulaw
no vad
line con 0
exec-timeout 0 0
transport input none
line aux 0
line 2 3
line vty 0 4
login
!
end
Command Reference
No new or modified commands are supported by this feature. All commands used with this feature are
documented in the Cisco IOS Release 12.1 command reference publications.
documented in the Cisco IOS Release 12.1 command reference publications.