Cisco Cisco IOS Software Release 12.2(2)XA

When using the NCS 1.0 profile of MGCP, enable incrementing of the POTS or DS0 portion of an 
endpoint name with the mgcp endpoint offset global configuration command. To return the endpoint 
name to the default, use the no form of this command.

This command has no keywords or arguments.

Disabled

Global configuration

This command is used with NCS 1.0 to increment the POTS or DS0 portion of an endpoint name by 1, 
to minimize potential interoperability problems with call agents (media gateway controllers). 

NCS 1.0 mandates that the port number of an endpoint be based on 1, and port numbering on some 
gateway platforms is based on 0.

When this command is configured, it offsets all endpoint names on the gateway. For example, an 
endpoint with a port number of aaln/0 is offset to aaln/1, and a DS0 group number of 0/0:0 is offset to 
0/0:1.

The following example shows the port number portion of an endpoint name being incremented:

Router(config)# mgcp endpoint offset

12.2(2)XA

This command was introduced.

Starts and allocates resources for the MGCP daemon.