Cisco Cisco IOS Software Release 12.2(2)XA
MGCP 1.0 Including NCS 1.0 and TGCP 1.0 Profiles
timeout tone cot1
81
Cisco IOS Release 12.2(2)XA
timeout tone cot1
To configure the continuity1 (cot1) tone timeout value, use the timeout tone cot1 MGCP profile
command. To set the value to the default, use the no form of this command.
command. To set the value to the default, use the no form of this command.
timeout tone cot1 cot1tone-value
no timeout tone cot1 cot1tone-value
Syntax Description
Defaults
3 seconds
Command Modes
MGCP profile
Command History
Usage Guidelines
The gateway uses the continuity1 (cot1) tone timeout value when the call agent does not provide a
timeout value associated with the request to generate a cot1 tone signal.
timeout value associated with the request to generate a cot1 tone signal.
Continuity1 and continuity2 tone signals are used in ISUP calls to determine that a call path has been
established before connecting a call. The call agent is provisioned to know which test to apply to a given
endpoint.
established before connecting a call. The call agent is provisioned to know which test to apply to a given
endpoint.
Examples
The following example shows how to set the continuity1 tone timeout value to 25 seconds:
Router(config)# mgcp profile nyc-ca
Router(config-mgcp-profile)# timeout tone cot1 25
Related Commands
cot1tone-value
Specifies the continuity1 tone (cot1) tone timeout value, in seconds. Range
is from 1 to 600.
is from 1 to 600.
Release
Modification
12.2(2)XA
This command was introduced.
Command
Description
mgcp
Starts and allocates resources for the MGCP daemon.
Initiates MGCP profile mode to create and configure a named MGCP
profile associated with one or more endpoints, or to configure the default
profile.
profile associated with one or more endpoints, or to configure the default
profile.
Sets continuity2 tone timeout value for MGCP.