Cisco Cisco IOS Software Release 12.2(2)XK

This section describes possibly unexpected behavior by Release 12.2(2)XK. Only severity 1 through 3 
caveats are included.

Caveats describe unexpected behavior in Cisco IOS software releases. Severity 1 caveats are the most 
serious caveats, severity 2 caveats are less serious, and severity 3 caveats are the least serious of these 
three severity levels.

Caveats in Cisco IOS Releases 12.2 and 12.2 T are also in Cisco IOS Release 12.2(2)XK. For 
information on caveats in Cisco IOS Release 12.2, see 

. For 

information on caveats in Cisco IOS Release 12.2 T, see 

. These 

two documents list severity 1 and 2 caveats and are located on 

CCO

and the Documentation CD-ROM. 

If you have an account with Cisco.com, you can use Bug Navigator II to find caveats of any 
severity for any release. To reach Bug Navigator II, Login to Cisco.com and click Software 
Center: Cisco IOS Software: Cisco Bugtool Navigator II. Another option is to go 
directly to http://www.cisco.com/support/bugtools.

The object cikeTunRemoteName is always an IP address regardless whether the peers have the isakmp 
key as a name peer or ipaddress peer. This caveat is a duplicate to caveat CSCds04437.

Cisco routers return a zero-length string when queried for the SNMP object isdnBearerPeerAddress, 
instead of the actual value. The command show call active voice bried displays the PeerAddress value.

Not able to create new rows in isdnSignalingTable. This caveat is a duplicate to caveat CSCdp57230.

When X.25 encapsulation is directly configured under the D channel on a Cisco 800 series router, at 
power up Layer 2 does not come up, even when isdn tei-negotiation powerup is set. To work around 
this problem, either enter the command no shut or a clear int bri 0 to bring up interface or use X.25 
encapsulation under a dialer interface. 

The CISCO-VOICE-DIAL-CONTROL-MIB object cvCallActiveCallerIDBlock returns 
incorrect values.

The object cvCallActiveSessionTarget returns incorrect values.