Cisco Cisco IOS Software Release 12.2(15)ZJ

To display status for the Session Initiation Protocol (SIP) user agent (UA), use the show sip-ua status 
command in privileged EXEC mode.

This command has no arguments or keywords.

Privileged EXEC

Use this command to verify SIP configurations.

12.1(1)T

This command was introduced on the Cisco 2600 series, Cisco 3600 series, and 
Cisco AS5300.

12.1(3)T

The statistics portion of the output was removed and included in the show sip-ua 
statistics command.

12.2(2)XA

This command was implemented on the Cisco AS5350 and Cisco AS5400.

12.2(2)XB

Command output was enhanced to display if media or signaling binding is 
enabled and the style of DNS SRV query:

1 for RFC 2052 

2 for RFC 2782

12.2(2)XB1

This command was implemented on the Cisco AS5850.

12.2(8)T

This command was integrated into Cisco IOS Release 12.2(8)T. Support for the 
Cisco AS5300, Cisco AS5350, and Cisco AS5400 is not included in this release. 
For the purposes of display, this command was separated from the generic show 
sip-ua command.

12.2(11)T

Command output was enhanced to display information on Session Description 
Protocol (SDP) application configuration. This command is supported on the 
Cisco AS5300, Cisco AS5350, Cisco AS5400, and Cisco AS5850 in this release.

12.2(13)T

Command output was enhanced to display the following:

Information on redirection message handling.

Information on handling of 180 responses with SDP.

12.2(15)ZJ

Command output was enhanced to display information on the duration of DTMF 
events.