Cisco Cisco IOS Software Release 12.2(15)ZJ

To display the current settings for the Session Initiation Protocol (SIP) user-agent (UA) timers, use the 
show sip-ua timers command in privileged EXEC mode.

This command has no arguments or keywords.

Privileged EXEC

Use this command to verify SIP configurations.

The following is sample output from this command:

Router# show sip-ua timers

SIP UA Timer Values (millisecs)

trying 500, expires 180000, connect 500, disconnect 500

comet 500, prack 500, rel1xx 500, notify 500

refer 500, register 500

12.1(1)T

This command was introduced on the Cisco 2600 series, Cisco 3600 series, and 
Cisco AS5300.

12.1(3)T

The output of this command was changed to reflect the changes in the timers 
command.

12.2(2)XA

This command was implemented on the Cisco AS5400 and Cisco AS5350.

12.2(2)XB

Command output was enhanced to display the following: Reliable provisional 
responses (PRACK/rel 1xx), Conditions met (COMET), and NOTIFY responses.

12.2(2)XB1

This command was implemented on the Cisco AS5850.

12.2(8)T

This command was integrated into Cisco IOS Release 12.2(8)T. Support for the 
Cisco AS5300, Cisco AS5350, and Cisco AS5400 is not included in this release. 
For the purposes of display, this command was separated from the generic show 
sip-ua command found previously in this reference.

12.2(11)T

This command is supported on the Cisco AS5300, Cisco AS5350, 
Cisco AS5400, and Cisco AS5850 in this release.

12.2(11)YT

Command output was enhanced to display Refer responses.

12.2(15)T

This command is supported on the Cisco 1700 series, Cisco 2600 series, 
Cisco 3600 series, and the Cisco 7200 series routers in this release.

12.2(15)ZJ

Command output was enhanced to display Register responses.