Cisco Cisco IOS Software Release 12.4(2)XB6
4
Release Notes for the Cisco Mobile Wireless Home Agent Feature in Cisco IOS Release 12.4(15)XM1
System Requirements
FS8548H CPU at 1250MHz, Rev 2.0, 512KB L2 Cache
1 Gigabit Ethernet interface
65536K bytes of processor board system flash (AMD S29GL256N)
Configuration register is 0x2102
Upgrading the SAMI Software
The SAMI comes preloaded with the operating system software. However, to take advantage of new
features and bug fixes, you can upgrade your SAMI with a new version of the software when it becomes
available.
features and bug fixes, you can upgrade your SAMI with a new version of the software when it becomes
available.
The SAMI software (image name c7svcsamifeature-mz) is a bundle of images - comprised of images for
the base card and daughter card components.
the base card and daughter card components.
Each image in the bundle has its own version and release numbers. When an upgrade is initiated using
the upgrade hw-module privileged EXEC command, the version and release numbers in the bundle are
compared to the versions currently running. If the versions are different, that image is automatically
upgraded.
the upgrade hw-module privileged EXEC command, the version and release numbers in the bundle are
compared to the versions currently running. If the versions are different, that image is automatically
upgraded.
Note
The show module command displays the software version of the LCP image, not the version of the full
SAMI bundle.
SAMI bundle.
To upgrade the SAMI image, perform the following tasks:
For example, to perform an image upgrade on a SAMI in slot 2 of the Cisco 7600 chassis, enter the
following commands.
following commands.
Sup>
Sup> enable
Sup# upgrade hw-module slot 2 software file
tftp://10.1.1.1/c7svcsami-h1is-ms
Loading c7svcsami-h1is-ms from <TFTP SERVER IPADDRESS> (via Vlan10):
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 34940891 bytes]
Sup# hw-module module 2 reset
Proceed with reload of module?[confirm]
% reset issued for module 2
Sup#
Apr 18 17:53:16.149 EDT: SP: The PC in slot 2 is shutting down. Please wait ...
Apr 18 17:53:33.713 EDT: SP: PC shutdown completed for module 2
Command
Purpose
Step 1
Sup> enable
Enters privileged EXEC mode.
Step 2
Sup# upgrade
hw-module
slot slot_num
software file
url/file-name
Copies the bundled image from the specified URL
to the compact flash.
to the compact flash.
Step 3
Sup# hw-module module
slot_num reset
Resets the module by turning the power off and
then on. SAMI resets using the new images.
then on. SAMI resets using the new images.
Step 4
Sup# show upgrade
software progress
Displays status of the upgrades that are occurring.