Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques
-12
Cisco Broadband Wireless Gateway 1.4 Command Reference, IOS Release 12.4(15)XL5
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.4 Command Reference, IOS Release 12.4(15)XL5
aaa accounting update
aaa accounting update
To enable periodic interim accounting records to be sent to the accounting server, use the aaa
accounting update command in global configuration mode. To disable interim accounting updates, use
the no form of this command.
accounting update command in global configuration mode. To disable interim accounting updates, use
the no form of this command.
aaa accounting update [newinfo] [periodic number [jitter {maximum max-value}]]
no aaa accounting update
Syntax Description
Defaults
Disabled
Command Modes
Global configuration
Command History
Usage Guidelines
•
When the aaa accounting update command is activated, the Cisco IOS software issues interim
accounting records for all users on the system. If the newinfo keyword is used, interim accounting
records will be sent to the accounting server every time there is new accounting information to
report. An example would be when IP Control Protocol (IPCP) completes IP address negotiation
with the remote peer. The interim accounting record will include the negotiated IP address used by
the remote peer.
accounting records for all users on the system. If the newinfo keyword is used, interim accounting
records will be sent to the accounting server every time there is new accounting information to
report. An example would be when IP Control Protocol (IPCP) completes IP address negotiation
with the remote peer. The interim accounting record will include the negotiated IP address used by
the remote peer.
newinfo
(Optional) An interim accounting record is sent to the accounting server
whenever there is new accounting information to report relating to the user in
question.
whenever there is new accounting information to report relating to the user in
question.
periodic
(Optional) An interim accounting record is sent to the accounting server
periodically, as defined by the number.
periodically, as defined by the number.
number
(Optional) Integer specifying number of minutes.
jitter
(Optional) Allows you to set the maximum jitter value in periodic accounting.
maximum
max-value
max-value
The number of seconds to set for maximum jitter in periodic accounting. The
value 0 turns off jitter. Jitter is set to 300 seconds (5 minutes) by default.
value 0 turns off jitter. Jitter is set to 300 seconds (5 minutes) by default.
Release
Modification
11.3
This command was introduced.
12.2(13)T
Introduced support for generation of an additional updated interim accounting
record that contains all available attributes when a call leg is connected.
record that contains all available attributes when a call leg is connected.
12.2(15)T11
The jitter keyword was added.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in
a specific 12.2SX release of this train depends on your feature set, platform,
and platform hardware.
a specific 12.2SX release of this train depends on your feature set, platform,
and platform hardware.
12.4(15)XL
This command was incorporated into Cisco IOS Release 12.4(15)XL.