Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques
-87
Cisco Broadband Wireless Gateway 1.4 Command Reference, IOS Release 12.4(15)XL5
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.4 Command Reference, IOS Release 12.4(15)XL5
dhcp gateway address
dhcp gateway address
To specify the IP address of the DHCP relay which the server is supposed to communicate with in the
BWG, use the dhcp gateway address command in user group configuration mode. Use the no form of
the command to revert to the default gateway IP address.
BWG, use the dhcp gateway address command in user group configuration mode. Use the no form of
the command to revert to the default gateway IP address.
dhcp gateway address gateway-address
no dhcp gateway address gateway-address
Syntax Description
Defaults
By default the BWG VT primary IP address is used.
Command Modes
User group configuration mode.
Command History
Usage Guidelines
The IP address specified as the gateway address must be the IP address of the BWG Virtual-Template
(either primary or one of the secondary IP addresses).
(either primary or one of the secondary IP addresses).
Examples
The following example illustrates how to configure DHCP relay using the dhcp gateway address
command:
command:
Router(config-gw-ug)# dhcp gateway address gateway-address
Related Commands
gateway-address
Specifies the IP address of the DHCP Relay. The IP address specified as the
gateway address must be the IP address of the BWG Virtual-Template (either
primary or one of the secondary IP addresses).
gateway address must be the IP address of the BWG Virtual-Template (either
primary or one of the secondary IP addresses).
Release
Modification
12.4(15)XL
This command was introduced.
Command
Description
dhcp server primary
Specifies the external DHCP server used for DHCP IP address allocation.