Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques
-17
Cisco Broadband Wireless Gateway 1.4 Command Reference, IOS Release 12.4(15)XL5
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.4 Command Reference, IOS Release 12.4(15)XL5
aaa authentication ppp
aaa authentication ppp
To specify one or more authentication, authorization, and accounting (AAA) authentication methods for
use on serial interfaces that are running PPP, use the aaa authentication ppp command in global
configuration mode. To disable authentication, use the no form of this command.
use on serial interfaces that are running PPP, use the aaa authentication ppp command in global
configuration mode. To disable authentication, use the no form of this command.
aaa authentication ppp {default}
no aaa authentication ppp {default}
Syntax Description
Defaults
If the default list is not set, only the local user database is checked. This has the same effect as that
created by the following command:
created by the following command:
aaa authentication ppp default local
Command Modes
Global configuration
Command History
Usage Guidelines
Note
The Cisco BWG only supports the default setting. If you configure aaa authentication ppp agw group
radius, the PPP session creation will fail.
radius, the PPP session creation will fail.
The lists that you create with the aaa authentication ppp command are used with the ppp
authentication command. These lists contain up to four authentication methods that are used when a
user tries to log in to the serial interface.
authentication command. These lists contain up to four authentication methods that are used when a
user tries to log in to the serial interface.
Create a list by entering the aaa authentication ppp list-name method command, where list-name is any
character string used to name this list MIS-access. The method argument identifies the list of methods
that the authentication algorithm tries in the given sequence. You can enter up to four methods. Method
keywords are described in
character string used to name this list MIS-access. The method argument identifies the list of methods
that the authentication algorithm tries in the given sequence. You can enter up to four methods. Method
keywords are described in
default
Uses the listed authentication methods that follow this keyword as the default
list of methods when a user logs in.
list of methods when a user logs in.
Release
Modification
10.3
This command was introduced.
12.0(5)T
Group server support and local-case were added as method keywords.
This command was integrated into Cisco IOS Release .
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.2(33)SRC
This command was integrated into Cisco IOS Release 12.2(33)SRC.