Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques

To enable the A11 Session update feature on the PDSN, and to send an A11 session update for either the 
Always On, or RNPDIT (or both) attributes that are downloaded from the AAA during the authentication 
phase, use the cdma pdsn a11 session-update command in global configuration. Use the no form of the 
command to disable this feature.

cdma pdsn a11 session-update {[always-on] 1-10 [rn-pdit] 0-9}

no cdma pdsn a11 session-update {[always-on] [rn-pdit] 1-10}

The default timeout value is 3 seconds. The default retransmit number is 3.

Global configuration

The following example enables both the always-on and rn-pdit attributes:

Router(config)#cdma pdsn a11 session-update ?

  always-on   Send Always-on indicator in A11 Session-Update

  rn-pdit     Send RN-PDIT in A11 Session-Update

Sends an A11 session update for the Always On attribute 
that is downloaded from the AAA during the authentication 
phase.

Sends an A11 session update for the RN-PDIT attribute 
that is downloaded from the AAA during the authentication 
phase.

Sets the timeout value for re-transmission of the A11 
session update message to the PCF. The default timeout 
value is 3 seconds.

Sets the retransmit limit for the A11 session update if A11 
session update Ack is not received from the PCF. Default 
re-transmission value is 3.

12.3(11)YF

This command was introduced.