Manualsbrain.com
  1. Manuels
  2. Marques
  3. Cisco
  4. Cisco IOS Software Release 12.4(2)XB6

Cisco Cisco IOS Software Release 12.4(2)XB6

Télécharger
Page de 2
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
 
Feature Mode for SCCP FXS Ports in Cisco IOS
First Published: June 22, 2006
Last Updated: August 1, 2008
F
eature Mode for SCCP FXS Ports in Cisco IOS provides enhanced call-control mode capability on 
analog ports on Cisco IOS voice gateways. When feature mode is enabled on a Cisco IOS voice gateway, 
calls through the analog FXS ports are controlled by Cisco Unified Communications Manager or by 
Cisco Unified CME, with basic call support in SRST mode. The SCCP telephony control (STC) 
application on the Cisco IOS voice gateway functions as a proxy to translate call-control messages 
between the Cisco call-control system and the voice gateway.
Configuration Information
Configuration information is included in the
 module in the
 
Supplementary Services Features for FXS Ports on Cisco IOS Voice Gateways 
Configuration Guide
 
at the following URL:
Command Reference Information
Command reference information is included in the the Cisco IOS Voice Command Reference, 
Release 12.4T, at the following URL:
New or Modified Commands
The following commands are new or modified for this feature:
•
debug voip application stcapp all
•
debug voip application stcapp port
•
show stcapp feature codes
•
stcapp call-control mode 
List of All Release 12.4T Commands
An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands 
List, All Releases, at the following URL:
•