Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques

To display debug messages for AHDLC, use the debug cdma pdsn a10 ahdlc command in privileged 
EXEC mode. To disable debug messages, use the no form of this command.

debug cdma pdsn a10 ahdlc [errors | events]

no debug cdma pdsn a10 ahdlc [errors | events]

If the command is entered without any optional keywords, all of the types of debug information are 
enabled.

The following is sample output from the debug cdma pdsn a10 ahdlc command:

Router# debug cdma pdsn a10 ahdlc errors

ahdlc error packet display debugging is on

Router# debug cdma pdsn a10 ahdlc events

ahdlc events display debugging is on

Router#

*Jan  1 00:18:30:%LINK-3-UPDOWN:Interface Virtual-Access1, changed state to up

*Jan  1 00:18:30:*****OPEN AHDLC*****

*Jan  1 00:18:30: ahdlc_mgr_channel_create

*Jan  1 00:18:30: ahdlc_mgr_allocate_available_channel:

*Jan  1 00:18:30:ahdlc:tell h/w open channel 9 from engine 0

(Optional) Displays details of AHDLC packets in error.

(Optional) Displays AHDLC events.

12.2(2)XC

This command was introduced.

12.2(8)BY

Keywords were made optional.