Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques
-131
Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
show wimax agw
show wimax agw
To display various system parameters, including BWG software version, number of base stations
allowed, number of subscribers allowed, and others, use the show wimax agw privileged EXEC
command.
allowed, number of subscribers allowed, and others, use the show wimax agw privileged EXEC
command.
show wimax agw
Syntax Description
This command has no arguments or keywords.
Defaults
No default behavior or values.
Command Modes
Privileged EXEC.
Command History
Usage Guidelines
The output of this show command contains the following information:
•
Version of WiMAX BWG Software
•
Maximum number of base stations allowed
•
Maximum number of subscribers allowed
•
Number of base stations currently connected
•
Number of R6 sessions currently active
•
Number of IP CS flows currently active
•
Number of Ethernet CS flows currently active
•
Number of IP CS hosts currently active
•
Number of Ethernet CS hosts currently active
•
Number of IP CS data packets and bytes sent
•
Number of IP CS data packets and bytes received
•
Number of Ethernet CS data packets and bytes sent
•
Number of Ethernet CS data packets and bytes received
•
Number of IP CS packets and bytes received redirected
•
Number of Ethernet CS packets and bytes received redirected
Release
Modification
12.4(15)XL
This command was introduced.
12.4(15)XL3
This command was enhanced to display the following
•
Current number of sessions with all IP packets redirected
•
IP-GRE Traffic Rcvd redirected
•
Eth-GRE Traffic Rcvd redirected