Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques
-134
Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
show wimax agw message
show wimax agw message
To display information about the messages supported by the BWG, use the show wimax agw message
command in privileged EXEC mode.
command in privileged EXEC mode.
show wimax agw message [function-type-no]
Syntax Description
Defaults
No default behavior or values.
Command Modes
Privileged EXEC.
Command History
Usage Guidelines
If a Function-Type number is not specified, then the command displays information about all the
supported Function-Types.
supported Function-Types.
The output of this show command contains the following information:
•
Function-Type number
•
Name of the Function-Type
•
Possible reference points over which this Function-Type can be received
•
Number of possible message types for this Function-Type
•
Details for each message type, which include
•
Message-Type number
•
Message-Type name
•
Reference points over which this Message-Type can be received
•
Whether a reply is expected for this Message-Type
Examples
The following is sample output for the show wimax agw message [function-type-no] command:
Message function type Data Path(3/0x3)
Highest message type value 16
Reference pts on which rcvd/sent BS <-> AGW R6(8)
Message type Deregistration Request(4/0x4)
Reference pts on which rcvd/sent BS <-> AGW R6(8)
Expecting response for this message
Message type Deregistration Response(5/0x5)
Reference pts on which rcvd/sent BS <-> AGW R6(8)
Expecting response for this message
Message type Deregistration Ack(6/0x6)
function-type-no
Function type value of the message to be displayed.
Release
Modification
12.4(15)XL
This command was introduced.