Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> FT: MS State Change, MT: Pre Attachment 

Request

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> Version: 0x01, Flags: 0x00, Type 0x90F

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> MSID: 067622242222, Reserved_1: 0x0000, Len: 

0x2E

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> TransactionID: 0x0001, Reserved_2: 0x0000, 

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> Rx (GigabitEthernet0/1)

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> IP: Src: 10.1.1.70, Dst: 2.2.2.2

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> Version: 0x4, IHL: 0x5, TOS: 0xC0

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> Total Length: 0x30, ID: 0x1B

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> Flags: Reserved: 0x0, DontFrag: 0x0, 

MoreFrag: 0x0

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> Fragment offset: 0x0, TTL: 0xFE, Protocol: 

0x11

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> Checksum: 0xAC97

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> UDP: Src Port: 0x8B7, Dst Port: 0x8B7

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> Checksum: 0x8A1B, Length: 0x1C

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> Message: Type 0x0911 (0x09, 0x11)

*Feb 23 08:29:28.344: AGW-Msg: <067622242222> FT: MS State Change, MT: Pre Attachment ACK 

Here is sample Message Events output on a successful MS Close:

Router#debug wimax agw message events

*Feb 23 08:33:49.064: AGW-Msg: <100022230001>Rx SrcAddr: 10.1.1.70, SrcPort: 2231, TID: 

0x3, Type: 0x304, Len: 0x38, Flag: 0x2, FT: Data Path(0x3), MT: Deregistration 

Request(0x4)

*Feb 23 08:33:49.064: AGW-Msg: <100022230001>[Decode] FT/MT: 3/4, Ref pt: 3, TID rcvd 

0X3(3), peer 0X2(2)[9/8], our 0X8002(32770)[3/12], Previous peer 0x1(1)[9/15], Previous 

our 0X8001(32769)[3/12],TID RC: 1

*Feb 23 08:33:49.064: AGW-Msg: <100022230001>[Decode] Req FT/MT: 3/4, Ref pt: 3, TID RC: 

1, RC: Success(0)

*Feb 23 08:33:49.064: AGW-Msg: <100022230001>Tx DstAddr: 10.1.1.70, SrcPort: 2231, TID: 

0x3, Type: 0x305, Len: 0x38, Flag: 0x0, FT: Data Path(0x3), MT: Deregistration 

Response(0x5)

*Feb 23 08:33:49.064: AGW-Msg: <100022230001>[Decode] FT/MT: 3/4, Ref pt: 3, Retcode = 

Success(0)

*Feb 23 08:33:49.064: AGW-Msg: <100022230001>Rx SrcAddr: 10.1.1.70, SrcPort: 2231, TID: 

0x3, Type: 0x306, Len: 0x1C, Flag: 0x0, FT: Data Path(0x3), MT: Deregistration Ack(0x6)

*Feb 23 08:33:49.064: AGW-Msg: <100022230001>[Decode] FT/MT: 3/6, Ref pt: 3, TID rcvd 

0X3(3), peer 0X3(3)[3/4], our 0X8002(32770)[3/12], Previous peer 0x2(2)[9/8], Previous our 

0X8001(32769)[3/12],TID RC: 1

*Feb 23 08:33:49.064: AGW-Msg: <100022230001>[Decode] Req FT/MT: 3/6, Ref pt: 3, TID RC: 

1, RC: Success(0)

*Feb 23 08:33:49.064: AGW-Msg: <100022230001>Deleting the R6 TID 0X65A3B46C, 

10.1.1.70/2.2.2.2/0

*Feb 23 08:33:49.064: AGW-Msg: <100022230001>[Decode] FT/MT: 3/6, Ref pt: 3, Retcode = 

Success(0)

Here is sample Message Events output when MS open fails:

Router#debug wimax agw message events

*Feb 23 11:00:40.408: AGW-Msg: <067611141111>Rx SrcAddr: 10.1.1.70, SrcPort: 2231, TID: 

0x1, Type: 0x90F, Len: 0x2E, Flag: 0x0, FT: MS State Change(0x9), MT: Pre Attachment 

Request(0xF)

*Feb 23 11:00:40.408: AGW-Msg: <067611141111>[Decode] Req FT/MT: 9/15, Ref pt: 3, TID RC: 

6, RC: Success(0)

*Feb 23 11:00:40.408: AGW-Msg: <067611141111>[Decode] Created the R6 TID 0X65A3B4A8, 

10.1.1.70/2.2.2.2/9

*Feb 23 11:00:40.408: AGW-Msg: <067611141111>Tx DstAddr: 10.1.1.70, SrcPort: 2231, TID: 

0x1, Type: 0x910, Len: 0x36, Flag: 0x0, FT: MS State Change(0x9), MT: Pre Attachment 

Response(0x10)

*Feb 23 11:00:40.408: AGW-Msg: <067611141111>[Decode] FT/MT: 9/15, Ref pt: 3, Retcode = 

Success(0)