Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques
-89
Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
ip access-group
ip access-group
To specify IPv4 access permissions between a subscriber and an external host through the BWG at a
particular access point, use the ip access-group command in user group configuration mode. Use the no
form of the command to disable the input access list.
particular access point, use the ip access-group command in user group configuration mode. Use the no
form of the command to disable the input access list.
access-group access-group-number {in | out}
Syntax Description
Defaults
There are no default values.
Command Modes
User group configuration mode.
Command History
Examples
The following example enables access group number 4:
access-group 4 in
access-group-number
Specifies the access group number.
in
Filters packets going to the subscriber (downstream).
out
Filters packets coming from the subscriber (upstream).
Release
Modification
12.4(15)XL
This command was introduced.