Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques
-105
Cisco Broadband Wireless Gateway 2.0 Command Reference, IOS Release 12.4(24)YG
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 2.0 Command Reference, IOS Release 12.4(24)YG
maximum-traffic-burst
maximum-traffic-burst
To configure the maximum burst size that the service flow can accommodate, use the
maximum-traffic-burst subcommand in service flow qos information configuration submode. Use the
no form of the command to disable this feature.
maximum-traffic-burst subcommand in service flow qos information configuration submode. Use the
no form of the command to disable this feature.
maximum-traffic-burst maximum-traffic-burst-value
Syntax Description
Defaults
Default values is 0.
Command Modes
Service flow qos information configuration submode.
Command History
Usage Guidelines
Since the physical speed of ingress/egress ports, the air interface, and the backhaul are greater than the
maximum sustained traffic rate parameter for a service, this parameter describes the maximum
continuous burst the system should accommodate for the service. This assumes the service is not
currently using any of its available resources.
maximum sustained traffic rate parameter for a service, this parameter describes the maximum
continuous burst the system should accommodate for the service. This assumes the service is not
currently using any of its available resources.
Examples
The following examples configure a maximum traffic burst size of 2 and 21:
wimax agw service-flow qos-info profile isf-qos-downlink
data-delivery-service real-time-variable-rate
maximum-latency 1
maximum-traffic-burst 2
maximum-traffic-rate-sustained 3
media-flow-type 012041424344
minimum-traffic-rate-reserved 4
policy-transmission-request 5
sdu-size 6
tolerated-jitter 7
traffic-priority 1
unsolicited-interval-grant 8
unsolicited-interval-polling 9
wimax agw service-flow qos-info profile isf-qos-uplink
data-delivery-service unsolicited-grant
maximum-latency 11
maximum-traffic-burst 21
maximum-traffic-rate-sustained 31
minimum-traffic-rate-reserved 41
policy-transmission-request 51
sdu-size 61
maximum-traffic-burst-
value
value
Specifies the maximum burst size of the service flow. Default values is 0.
Release
Modification
12.4(15)XL
This command was introduced.